ram ( 8-bit) rom ( 8-bit) type package 32 k 1.5 k tqfp048-p-0707b *lead-free (under development) , qfp044-p-1010f *lead-free (under planning) MN101C78A (under development) MN101C78A minimum instruction execution time 0.1 s (at 3.0 v to 3.6 v, 10 mhz) 0.235 s (at 1.8 v to 3.6 v, 4.25 mhz) 62.5 s (at 1.8 v to 3.6 v, 32 khz) interrupts ? reset watchdog external 0 external 1 external 2 external 4 (key interrupt dedicated) timer 0 timer 1 timer 2 timer 3 timer 6 time base timer 7 (2 systems) timer 8 (2 systems) serial 0 (2 systems) serial 1 (2 systems) serial 3, serial 4 a/d conversion finish timer counter timer counter 0 : 8-bit 1 (square-wave/8-bit pwm output, event count, generation of remote control carrier, simple pulse width measurement, added pluse (2-bit) system pwm output, real time output control) (square-wave/pwm output to large current terminal p50 possible) clock source 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of osc oscillation clock frequency; 1/1 of xi oscillation clock frequency; external clock input interrupt source coincidence with compare register 0 timer counter 1 : 8-bit 1 (square-wave output, event count, synchronous output event) clock source 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of osc oscillation clock frequency; 1/1 of xi oscillation clock frequency; external clock input interrupt source coincidence with compare register 1 timer counter 0, 1 can be cascade-connected. timer counter 2 : 8-bit 1 (square-wave output, added pluse (2-bit) system pwm output, pwm output, serial transfer clock output, real time output control, event count, synchronous output event, simple pulse width measurement) (square-wave/ pwm output to large current terminal p52 possible) clock source 1/2, 1/4 of system clock frequency; 1/1, 1/4, 1/16, 1/32, 1/64 of osc oscillation clock frequency; 1/1 of xi oscillation clock frequency; external clock input interrupt source coincidence with compare register 2 timer counter 3 : 8-bit 1 (square-wave output, event count, generation of remote control carrier, serial transfer clock) clock source 1/2, 1/8 of system clock frequency; 1/1, 1/4, 1/16, 1/64, 1/128 of osc oscillation clock frequency; 1/1 of xi oscillation clock frequency; external clock input interrupt source coincidence with compare register 3 timer counter 2, 3 can be cascade-connected. timer counter 6 : 8-bit freerun timer clock source 1/1 of system clock frequency; 1/1, 1/128, 1/8192 of osc oscillation clock frequency; 1/1, 1/128, 1/8192 of xi oscillation clock frequency interrupt source coincidence with compare register 6 timer counter 7 : 16-bit 1 (square-wave output, 16-bit pwm output (cycle / duty continuous variable), event count, synchronous output event, pulse width measurement, input capture, real time output control, high performance igbt output) (square-wave/pwm output to large current terminal p51 possible) clock source 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of osc oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency interrupt source coincidence with compare register 7 (2 lines), input capture register mad00039aem 1
MN101C78A timer counter (continue) timer counter 8: 16 bit 1 (square-wave/16-bit pwm output [duty continuous variable], event count, pulse width measurement, input capture) (square-wave/pwm output to large current terminal p53 possible) clock source 1/1, 1/2, 1/4, 1/16 of system clock frequency; 1/1, 1/2, 1/4, 1/16 of osc oscillation clock frequency; 1/1, 1/2, 1/4, 1/16 of external clock input frequency interrupt source coincidence with compare register 8 (2 lines), input capture register timer counters 7, 8 can be cascade-connected. (square-wave output, pwm input capture, pluse width measurement is possible as a 32-bit timer.) time base timer (one-minute count setting) clock source 1/1 of osc oscillation clock frequency; 1/1 of xi oscillation clock frequency interrupt source 1/128, 1/256, 1/512, 1/1024, 1/8192, 1/32768, of clock source frequency watchdog timer interrupt source 1/65536, 1/262144, 1/1048576 of system clock frequency serial interface serial 0 : synchronous type/uart (full-duplex) 1 clock source 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of osc oscillation clock frequency, external clock serial 1 : synchronous type/uart (full-duplex) 1 clock source 1/2, 1/4 of system clock frequency; pulse output of timer counter 1 or 2; 1/2, 1/4, 1/16, 1/64 of osc oscillation clock frequency, external clock serial 3 : synchronous type/single-master i 2 c 1 clock source 1/2, 1/4 of system clock frequency; pulse output of timer counter 2 or 3; 1/2, 1/4, 1/16, 1/32 of osc oscillation clock frequency, external clock serial 4 : i 2 c slave 1 applicable for i 2 c high-speed transfer mode, 7bit/10bit address setting, general call see the next page for pin assignment and support tool. mad00039aem i/o pins 40 common use specified pull-up resistor available input/output selectable (bit unit) (35) ( ): qfp044-p-1010f i/o a/d inputs 10-bit 8-ch. (with s/h) lcd 12 segments 4 commons (static, 1/2, 1/3, or 1/4 duty) (usable if vlcd vdd) special ports buzzer output, remote control carrier signal output, high-current drive port electrical characteristics supply current limit symbol condition min typ max unit parameter idd1 fosc = 4 mhz, vdd = 3 v 1 2 ma idd2 fx = 32 khz, vdd = 3 v 4 15 a idd3 fx = 32 khz, vdd = 3 v, ta = 25c 2 10 a idd4 fx = 32 khz, vdd = 3 v, ta = ? 40 c to +85c 40 a idd5 vdd = 3 v, ta = 25 c2 a idd6 vdd = 3 v, ta = ? 40c to +85 c30 a operating supply current supply current at halt supply current at stop 2
12 13 14 15 16 17 18 19 20 21 22 44 43 42 41 40 39 38 37 36 35 34 tm0oa/led0/p50 tm7o/led1/p51 tm2oa/led2/p52 tm8o/led3/p53 v ss osc2 osc1 v dd xi/p90 xo mmod nrst,p27 p10/sda4a p11/scl4a vref+ txd0a/sbo0a/pa0/an0 rxd0a/sbi0a/pa1/an1 sbt0a/pa2/an2 pa3/an3 v dd p54/irq0/acz0 p55/irq1/acz1 seg4/p73/key3 seg5/p72/key2 seg6/p71/key1/tm3io seg7/p70/key0/tm1io seg8/p17/sbt1a/tm2ob seg9/p16/tm2io/rxd1a/sbi1a seg10/p15/tm0ob/txd1a/sbo1a seg11/p14/tm0io/rmout nbuzzer/p13/tm7io/clkout buzzer/p12/tm8io p56/irq2 p36/vlc1 p35/vlc2 p34/vlc3 com3/p33/sb03/sda3 com2/p32/sbt3/scl3 com1/p31/sbi3 com0/p30 seg0/p77/key7/sbt0b/scl4b seg1/p76/key6/rxd0b/sbi0b/sda4b seg2/p75/key5/txd0b/sbo0b seg3/p74/key4 33 32 31 30 29 28 27 26 25 24 23 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16 17 18 19 20 21 22 23 24 48 47 46 45 44 43 42 41 40 39 38 37 tm0oa/led0/p50 tm7o/led1/p51 tm2oa/led2/p52 tm8o/led3/p53 v ss osc2 osc1 v dd xi/p90 xo mmod nrst, p27 p10/sda4a p11/scl4a vref+ txd0a/sbo0a/pa0/an0 rxd0a/sbi0a/pa1/an1 sbt0a/pa2/an2 pa3/an3 pa4/an4 txd1b/sbo1b/pa5/an5 sbt1b/pa6/an6 rxd1b/sbi1b/pa7/an7 p54/irq0/acz0 seg4/p73/key3 seg5/p72/key2 seg6/p71/key1/tm3io seg7/p70/key0/tm1io seg8/p17/sbt1a/tm2ob seg9/p16/tm2io/rxd1a/sbi1a seg10/p15/tm0ob/txd1a/sbo1a seg11/p14/tm0io/rmout nbuzzer/p13/tm7io/clkout buzzer/p12/tm8io p56/irq2 p55/irq1/acz1 p37 p36/vlc1 p35/vlc2 p34/vlc3 com3/p33/sb03/sda3 com2/p32/sbt3/scl3 com1/p31/sbi3 com0/p30 seg0/p77/key7/sbt0b/scl4b seg1/p76/key6/rxd0b/sbi0b/sda4b seg2/p75/key5/txd0b/sbo0b seg3/p74/key4 36 35 34 33 32 31 30 29 28 27 26 25 1 2 3 4 5 6 7 8 9 10 11 12 pin assignment tqfp048-p-0707b * lead-free (under development) type mn101cf78a (under development) rom ( 8-bit) 32 k ram ( 8-bit) 1.5 k minimum instruction execution time 0.1 s (at 3.0 v to 3.6 v, 10 mhz) 0.235 s (at 2.7 v to 3.6 v, 4 mhz) 62.5 s (at 2.7 v to 3.6 v, 32 khz) package tqfp048-p-0707b *lead-free (under development) support tool flash memory built-in type in-circuit emulator px-ice101c / d + px-prb101c78-tqfp048-p-0707b-m (under development) px-ice101c / d + px-prb101c78-qfp044-p-1010f-m (under planning) mad00039aem qfp044-p-1010f * lead-free (under planning) MN101C78A MN101C78A 3
MN101C78A mad00039aem 4
if you have any inquiries or questions about this book or our semiconductor prod- ucts, please contact one of our sales offices listed on the back or semiconductor company s sales department. request for your special attention and precautions in using the technical information and semiconductors described in this book (1) an export permit needs to be obtained from the competent authorities of the japanese government if any of the products or technologies described in this book and controlled under the "foreign exchange and foreign trade law" is to be export- ed or taken out of japan. (2) the technical information described in this book is limited to showing representative characteristics and applied circuits examples of the products. it neither warrants non-infringement of intellectual property right or any other rights owned by our com- pany or a third party, nor grants any license. (3) we are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this book. (4) the products described in this book are intended to be used for standard applica- tions or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). consult our sales staff in advance for information on the following applications: special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. any applications other than the standard applications intended. (5) the products and product specifications described in this book are subject to change without notice for modification and/or improvement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (6) when designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the con- sideration of incidence of break down and failure mode, possible to occur to semi- conductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) when using products for which moisture-proof packaging is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) this book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. windows is a registered trademark of microsoft corporation. ms-dos is a registered trademark of microsoft corporation. sun and solaris are registered trademarks of sun microsystems, inc. pc-9801 is a registered trademark of nec. pc/at is a registered trademark of international business machines corporation. tron is an abbreviation of ?he real-time operating system nucleus. itron is an abbreviation of ?ndustrial tron. itron is an abbreviation of ?icro industrial tron. tron, itron, and itron do not refer to any specific product or products. other company names and product names are registered trademarks.
|
